SimRig EasyBracket Kit for SR Motion System

The SIMRIG EasyBracket Kit lets you bolt a SIMRIG SR1, SR2 or SR3 motion system to the sides of an aluminum profile cockpit that is already built. It is for sim racers who want motion without taking their rig apart.

Why it matters

• Installing motion drops from several hours to roughly one hour.
• Made for rigs that are already assembled.
• The actuators go on without rebuilding the cockpit.
• Works on wider rigs, over 620 mm.
• Side mounting gives a tidy installation.
• The black finish matches the SIMRIG actuators.
• Designed around the SIMRIG SR1, SR2 and SR3 systems.

Who it is for

The kit suits drivers who own a finished aluminum profile cockpit and want a quicker route to SIMRIG motion. It helps most on wide rigs and for anyone who would rather not strip down a working setup. Whether you are upgrading a dedicated simulator or putting together a professional-grade motion cockpit, it makes installation simpler.

How it works

SIMRIG introduced the EasyBrackets as an optional way to mount its SR1, SR2 and SR3 motion systems. You do not need a full rebuild or to mount the actuators underneath. Instead, each actuator bolts straight onto the side of the rig, which is faster and leaves them easier to reach.

The black brackets are styled to match the SIMRIG actuators for a cleaner look. They are meant for aluminum profile cockpits, but they do not fit rigs made from 40x40 profile.

If your rig is narrower than 620 mm, SIMRIG advises using 20x20 mm profiles rather than EasyBrackets. The brackets are the better choice for existing cockpits and wider builds.

Key specs

• Works with SIMRIG SR1, SR2 and SR3 motion systems
• Actuators mount on the sides of the rig
• Black finish matched to SIMRIG actuators
• Not for rigs built from 40x40 profile
• Recommended for rigs wider than 620 mm
• Installation takes about 1 hour

In the box

In use

Adding motion to a finished cockpit often means tearing the whole thing down. The EasyBracket Kit avoids that, because the actuators fasten directly to the side profiles. You get far less downtime, a quicker install and a neater upgrade for a rig you already have. Motion becomes easier to add, without giving up rigidity or support for wider cockpits.

The user manual explains how to attach a motion system using EasyBrackets.

Figure: a SIMRIG SR2 bolted straight onto the rig through EasyBrackets fitted beforehand.