Trak Racer
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE)
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 2
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 3
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 4
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 5
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 6
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 7
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 8
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 9
Trak Racer Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE), view 10

Trak Racer USA

Ready 2 Race TR8 PRO RACING SIMULATOR - (PRO BUNDLE)

$3,570.99

Pay monthly

  • Brand-new, factory sealed
  • Freight shown before you pay
  • Insured and tracked delivery
  • Full manufacturer warranty
Request a written quote Talk to SDP Support: (952) 649-5710
  • Ships in 2 business days
  • Assembly required

Build it out

Parts made for the Trak Racer USA line. Tick what you want and it ships on the same order. Hover a part to see what it does.

Seats

The part you sit in. It bolts to the seat rails on the frame, and on most rigs the position slides back and forth to suit your height.

Monitors

Holds the screen at racing distance. A cockpit-mounted arm bolts to the rig so the screen and the seat move together. A freestanding stand sits on the floor by itself and carries heavier or triple-screen setups.

  • A 34 inch curved widescreen gaming monitor to use as the display for the rig.

    $381.99In stock

  • Floor stand for two screens that sits apart from the rig and can later take a third.

    $378.99In stock

  • Floor stand for three screens of 22 to 32 inches, standing on its own legs in front of the rig.

    $324.99In stock

  • Floor stand for three screens of 32 to 45 inches, standing on its own legs in front of the rig.

    $324.99In stock

  • Floor stand for four screens up to 45 inches, standing on its own legs in front of the rig.

    $451.99In stock

  • Floor stand for three screens up to 55 inches, with extra legs for stability.

    $541.99In stock

  • Floor stand for four screens up to 55 inches, with extra legs for stability.

    $676.99In stock

  • Variable Adjustment VESA Adapter Kit – Tool-Free Monitor Alignment for Monitor Stands

    $98.99In stockChoose options

  • Floor stand holding one screen or TV up to 80 inches in front of the rig, not attached to it.

    $252.99In stock

  • Floor stand that carries four screens up to 45 inches, standing separately from the rig.

    $523.99In stock

  • Floor stand for three screens up to 45 inches that stands apart from the cockpit.

    $396.99In stock

  • Floor stand for a large main screen plus a smaller second one, standing apart from the rig.

    $387.99In stock

  • Floor stand holding one screen or TV up to 80 inches, standing on its own in front of the rig.

    $252.99In stock

  • Holds one screen up to 70 inches on the cockpit itself, so it moves with the rig.

    $98.99In stock

Wheels and pedals

The controls themselves. The wheelbase bolts to the deck at the front of the rig, the pedals to the pedal plate down below.

  • Frame bracket that hangs pedals from above, the way they sit in a real race car.

    $162.99In stock

  • Rails under the pedal plate that let the pedals slide nearer or further in seconds.

    $98.99In stock

  • Rest for the left foot that bolts next to the pedals on the pedal plate or a profile rail.

    $53.99In stock

Shifters

For manual gears and rally-style handbrake turns. These mount on the side of the frame, so pick the side you want to reach for.

  • A pull-up lever that bolts beside the wheel for handbrake turns in rally and drift.

    $105.99In stock

  • A hand-operated brake lever with a load cell, used for rally handbrake turns and drifting.

    $116.99In stock

  • Bracket that holds a handbrake on the right side of the rig, behind the shifter.

    $34.99In stock

  • Side bracket that puts a shifter and a handbrake next to each other on the rig.

    $89.99In stock

Mounts

Brackets that keep everything else in reach once you are strapped in: keyboard and mouse, a tablet, a button box, a stream deck, the PC itself.

  • Swivel mount that holds a tablet, button box or stream deck beside the wheel.

    $107.99In stock

  • Tray that clamps to the side of the rig to hold a keyboard and mouse within reach.

    $116.99In stock

  • Shelf that bolts to the rig frame to hold a desktop PC tower off the floor.

    $107.99In stock

  • Swivel arm that holds a tablet, stream deck or button box next to the wheel.

    $53.99In stock

  • Keyboard and mouse tray on its own legs that stands next to the rig rather than bolting on.

    $125.99In stock

  • Small shelf on a short frame rail that gives the mouse a flat surface beside the wheel.

    $43.99In stock

  • A small shelf that clamps to the rig frame and charges a phone wirelessly while you drive.

    $43.99In stock

Motion and haptics

Physical feedback. Shakers bolt to the seat or the frame and vibrate with the road surface, the kerbs and the engine, so you feel the car as well as see it.

  • Two vibration units plus the amplifier that drives them, adding rumble you feel through the rig.

    $180.99In stock

  • Transducer that bolts to the seat or frame and shakes it in time with the game.

    $71.99In stock

  • Two small vibration units that bolt to pedals or a shifter so you feel kerbs and engine rumble.

    $71.99In stock

  • Plate under the seat that carries a bass shaker so vibration comes up through the seat.

    $80.99In stock

  • Single bracket that holds one bass shaker on the frame so vibration carries through the rig.

    $43.99In stock

  • Steel brackets that place five speakers around a TR8 PRO frame for sound from all sides.

    $89.99In stock

Flight

Mounts for a flight stick, a throttle and rudder pedals, if you fly as well as drive.

  • Upright post between the legs that holds a centre-mounted flight stick or yoke.

    $89.99In stock

  • Brackets for the left and right of the rig that hold a flight stick and a throttle.

    $98.99In stock

Extras

The things you notice later: casters so it rolls out of the way, a mat to protect the floor, covers, longer cables.

  • A mat that sits under the rig, with LED edge lighting and a glow-in-the-dark surface.

    $80.99In stock

  • Lockable wheels that bolt under the frame so the rig can be rolled on hard floors.

    $62.99In stock

  • Two stick-on light strips, run off USB, that fit along the frame for ambient light.

    $34.99In stock

  • Red rubber trim that presses into the frame slot to cover sharp edges and add grip.

    $16.99In stock

  • Hook that clamps to a frame rail to hang a headset or a steering wheel when not racing.

    $16.99In stock

SKU TR8PRO-R2R-BUN2-US

Ask about this product

    About this product

    The Ready 2 Race TR8 PRO Pro Bundle is a complete Trak Racer sim racing setup. It is for drivers on a budget who still want to be competitive. It gathers the cockpit, seat, direct drive base, wheel, pedals and shifter, so you can sit down, grip the wheel and start driving.

    Trak Racer put a lot of research and design work into this package. Comfort and ergonomics were the main goals, across every style of sim racing.

    What the bundle includes

    • Trak Racer TR8 Pro Racing Simulator (TR8PRO)
    • Integrated Single Monitor Stand for the TR8 Pro, holds screens up to 70" (TR-TR8-SING-BUND)
    • Simucube 2 Pro Direct Drive System, R2 (SC2PRO)
    • Universal Direct Motor Mount (TR-DDBRDDM)
    • GT Style Fixed Fiberglass Seat with seat brackets (SA-10)
    • Conspit 310 APEX Steering Wheel (CP118)
    • VNM Racing Pedals, 3 pedal set (VNM-PE01ST3)
    • VNM Shifter, H-pattern manual or sequential gearbox (VNM-S01BUN)

    Please note: a computer and monitor are not included, and this bundle is PC compatible only.

    TR8 Pro racing simulator (TR8PRO)

    The TR8 Pro builds on the original Trak Racer TR8, which Trak Racer calls the King of Sims from 2018 to 2021. It is strong, adjustable and has an integrated monitor stand, and it goes together in 30 to 60 minutes. Trak Racer shaped the Pro version using feedback from more than 10,000 TR8 owners.

    Integrated monitor stand (TR-TR8-SING-BUND)

    This single monitor stand is built for the TR8 Pro to the same high standard as the cockpit, and it bolts solidly to it. It fits most monitors and TVs with VESA mounting points:

    • 75mm and 100mm through the main plate
    • 200mm, 300mm and 400mm through the included mount extensions

    It works for gaming, entertainment or business use.

    GT style fixed fiberglass seat (SA-10)

    The bundle lists this seat as SA-10, and Trak Racer's description of it refers to the SA-05 fiberglass seat. It is a very light competition seat, engineered for strength and comfort. It is sized for most drivers in the S to XL range (up to a 42" waist). Integrated bolsters hold you in place, and the cover is a washable, impact-absorbing, fire retardant fabric. Trak Racer built it for support, safety, comfort, durability and style, and to stand up to hard sim racing use.

    • High density foam construction
    • Material: ultra-soft cloth
    • Padding: high quality foam
    • Harness system ready, side mount, M8 size, 29.5mm spacing
    • Optional extras: Trak Racer Seat Sliders and Trak Racer Seat Brackets
    • Weight limit: up to 160kg (352 lbs)

    It suits all cockpits, but check where the mounting points sit. Important: this seat is for race simulators only, not for road use.

    Simucube 2 Pro direct drive wheel base with direct drive mount

    SC2PRO + TR-DDBRDDM. The SC2 Pro is a direct drive force feedback wheel base for PC sim racing, made for fans of esports, technology and motorsport.

    • 25 Nm of torque, enough for detailed feedback on any track, car or condition
    • 22-bit sensor
    • A very fast torque response, so sharp kinks come through with clarity
    • Torque response rate you can adjust to your preference

    Conspit 310 APEX steering wheel (CP118)

    The CONSPIT 310 APEX is a current generation open-wheel hub for competitive sim racing. Its full aluminum alloy structure keeps it light yet very rigid, and it damps vibration well, so you get clean tactile feedback lap after lap.

    VNM Racing Pedals, 3 pedal set (VNM-PE01ST3)

    VNM Simulation designed this set for precision and quality. The brake uses a 200kg load cell, and a base plate and dampers are available as options.

    VNM Shifter, H-pattern manual or sequential gearbox (VNM-S01BUN)

    Set the VNM Shifter up as a sequential gearbox or as an H-pattern with up to 7 speeds (6 plus reverse). The all-metal build gives realistic tactile feedback, and the tension is adjustable. It is compact and clever in design, and you can mount it to your simulator from the side or from the base.

    Read more Show less

    Shipping and returns

    Shipping

    Trak Racer items ship within the US via FedEx Ground, typically 1 to 2 business days to dispatch, then about 5 to 10 business days to deliver. The exact rate is shown at checkout.

    Because these ship domestically, there are no import duties or fees. Contiguous US. Alaska, Hawaii, and Puerto Rico by request, contact us before ordering.

    Returns

    Trak Racer products may be returned within 14 days of the dispatch date, unused and in original packaging. Contact us first for a return authorization. Unused returns within the window are refunded in full, less original shipping. A 10% restocking fee applies to items returned outside the window or showing signs of use. See our Return and Refund Policy.

    Finish the build