Trak Racer
TR80S RACING SIMULATOR
TR80S RACING SIMULATOR
TR80S RACING SIMULATOR
TR80S RACING SIMULATOR
TR80S RACING SIMULATOR
TR80S RACING SIMULATOR
TR80S RACING SIMULATOR
TR80S RACING SIMULATOR

Trak Racer USA

TR80S RACING SIMULATOR

$499.00

  • Brand-new, factory sealed
  • Freight at cost, quoted at checkout
  • Insured and tracked delivery
  • Full manufacturer warranty
  • Ships in 2 business days
  • Assembly required

Build it out

Parts made for the Trak Racer USA line. Tick what you want and it ships on the same order. Hover a part to see what it does.

Seats

The part you sit in. It bolts to the seat rails on the frame, and on most rigs the position slides back and forth to suit your height.

Monitors

Holds the screen at racing distance. A cockpit-mounted arm bolts to the rig so the screen and the seat move together. A freestanding stand sits on the floor by itself and carries heavier or triple-screen setups.

  • Monitor arm that bolts to a profile rig and carries one screen up to 60 inches.

    $139.00In stock

  • Bolts one screen up to 80 inches onto the rig frame so it stays lined up with the wheel.

    $229.00In stock

  • Floor stand holding one screen or TV up to 80 inches in front of the rig, not attached to it.

    $279.00In stock

  • Floor stand holding one screen or TV up to 80 inches, standing on its own in front of the rig.

    $279.00In stock

  • Floor stand for three screens of 32 to 45 inches, standing on its own legs in front of the rig.

    $359.00In stock

  • Floor stand for three screens of 22 to 32 inches, standing on its own legs in front of the rig.

    $359.00In stock

  • Bolts two screens onto the rig frame so they move with the cockpit instead of standing on the floor.

    $379.00In stock

  • Holds three screens on arms bolted to the rig frame so they move with the cockpit.

    $385.00In stock

  • Floor stand for two screens that sits apart from the rig and can later take a third.

    $419.00In stock

  • Floor stand for a large main screen plus a smaller second one, standing apart from the rig.

    $429.00In stock

  • Floor stand for three screens up to 45 inches that stands apart from the cockpit.

    $439.00In stock

  • Floor stand for four screens up to 45 inches, standing on its own legs in front of the rig.

    $499.00In stock

  • Floor stand that carries four screens up to 45 inches, standing separately from the rig.

    $579.00In stock

  • Floor stand for three screens up to 55 inches, with extra legs for stability.

    $599.00In stock

  • Floor stand for four screens up to 55 inches, with extra legs for stability.

    $749.00In stock

Wheels and pedals

The controls themselves. The wheelbase bolts to the deck at the front of the rig, the pedals to the pedal plate down below.

  • Small adapter so an Asetek wheelbase lines up with the holes in a Trak Racer wheel deck.

    $10.00In stock

  • Adapter plate that lets an Asetek wheelbase bolt to the TR-One wheel deck; the base kit is needed too.

    $20.00In stock

  • A footplate for the TR80S that supports your heel under the pedals and adjusts for leg length.

    $39.00In stock

  • Side bracket that holds a Fanatec direct drive wheelbase on the rig wheel plate.

    $49.00In stock

  • A plate that holds a MOZA direct drive wheelbase on the rig's front mount; needs the TR-One base kit.

    $59.00Pre-order

  • Deck plate a direct drive wheelbase bolts to; sits on top of the TR-One base kit.

    $59.00In stock

  • Front plate that carries a direct drive wheelbase; the TR-One base kit is needed too.

    $59.00In stock

  • Bracket that mounts a Fanatec direct drive wheelbase to the side of the wheel plate.

    $65.00In stock

  • Plate and brackets that hold an Asetek direct drive wheelbase on the rig's wheel deck.

    $75.00In stock

  • Mounting channel that holds a Fanatec direct drive wheel base on the rig.

    $99.00In stock

  • A bracket set that bolts a MOZA direct drive wheelbase onto the rig's wheel plate.

    $99.00Pre-order

  • Bracket that holds a direct drive wheelbase on the front of the rig wheel plate.

    $99.00In stock

  • Sliding rails that fit under the pedal plate so pedal position changes without tools.

    $99.00In stock

  • Pedal bracket set with a heel rest that clamps pedals to the rig at your chosen angle.

    $149.00In stock

  • Mounting channel that bolts a wheel base to the rig, fitted vertically or horizontally.

    $149.00In stock

  • Front mounting plate that fixes a MOZA R9 to R25 wheel base to the rig.

    $149.00Pre-order

  • Front mounting plate for Simucube, VRS and Simagic Alpha wheel bases on the rig.

    $149.00In stock

  • A mounting channel and plate that hold an Asetek direct drive wheelbase at the front of the rig.

    $149.00In stock

SKU TR80S-B

Ask about this product

    About this product

    A great value sim racing cockpit with Formula and GT Hybrid Pedal Plate
    Pre-Drilled Pedal Mount to fit all the major brand pedals
    Heavier duty brackets with side-mounted wheel uprights for rigidity
    Flight Simulator Expandable
    Designed and engineered in Australia

    Trak Racer are proud partners of Alpine F1 team and Airbus Aircraft

    Shipping and returns

    Shipping

    Trak Racer items ship within the US via FedEx Ground, typically 1 to 2 business days to dispatch, then about 5 to 10 business days to deliver. The exact rate is shown at checkout.

    Because these ship domestically, there are no import duties or fees. Contiguous US. Alaska, Hawaii, and Puerto Rico by request, contact us before ordering.

    Returns

    Trak Racer products may be returned within 14 days of the dispatch date, unused and in original packaging. Contact us first for a return authorization. Unused returns within the window are refunded in full, less original shipping. A 10% restocking fee applies to items returned outside the window or showing signs of use. See our Return and Refund Policy.

    Finish the build